Search Bar 4
Search Bar 6
Home
Garage
Search
More
888-294-4979 [email protected]
Search Bar 10
Home Blog How To Replace A Subaru Scrape Guard

How To Replace A Subaru Scrape Guard

Replacing the broken scrape guard on your Subaru will help protect your car from damage. Ignore it for too long, and water, dirt, and road salt may damage or rust important components under the vehicle. Replacing a scrape guard isn’t a tough job, and doing it yourself can help save money on labor charges. This guide will explain just how to go about it.

Tools For The Job

Apart from the new bumper, engine, transmission or fuel tank scrape guard – which you can easily find on our website – you’ll also need some tools.

  • Socket wrench set
  • Screwdriver
  • Plastic pry tools (optional, for easier removal)
  • Trim panel removal tool (optional, for easier removal)
  • Jack stands or car lift

Step-By-Step Replacement

subaru engine scrape guard

While this is a general guide on how to replace your underguard, it applies to just about any Subaru model.

  • Prepare the Vehicle:
    • Lift your Subaru on a ramp or use jack stands. Make sure you engage the parking brake.
    • Ensure the engine is turned off and has cooled down.
  • Locate the Scrape Guard:
    • The engine scrape guard is typically located directly underneath the engine as it's designed to protect it from road hazards. Transmission or fuel tank scrape guards are also easy to replace - refer to your manual to find their specific locations.
  • Remove the Old Scrape Guard:
    • Depending on the design of your Subaru’s scrape guard, you may need to remove screws, clips, or bolts that secure it in place. It's always a good idea to snap a photo before you start work to verify correct installation afterward.
    • Carefully use a screwdriver or plastic pry tools to gently release any clips or fasteners holding the scrape guard to the body.
  • Install the New Scrape Guard:
    • Align the new scrape guard with the corresponding mounting points on the bodywork.
    • Align any clips or hooks with the corresponding openings on the vehicle. Our OEM scrape guards will fit exactly like the original - no modifications needed. (Another reason why OEM parts are always the best choice.)
    • If required, insert and tighten screws or bolts using a socket wrench.
    • Gently push on different parts of the new scrape guard to ensure it's securely attached and doesn't wobble.

Subaru Parts Plus Has A Variety Of OEM Scrape Guards

Subaru scrape guards

Subaru Parts Plus has been supplying quality OEM Subaru parts since 2005. We sell genuine parts at wholesale prices. And every splash guard and scrape guard is backed by Subaru’s manufacturer warranty. Replacing your own under guard isn’t that difficult. And it helps save you money on labor charges.

Our staff are Subaru enthusiasts with extensive parts knowledge. We offer worry-free return, cancellation, and shipping policies. If a part is not right for your Subaru, you can return or cancel your order with ease. Call us at 1-888-294-4979 or get in touch online for the perfect part at the best price.